10. Device Biasing, Trigger Function, and Timing Reference

10. Device Biasing, Trigger Function, and Timing Reference
SanjCONTROLLER PLUS™ I/O (for TR imaging):
Label
Description
A. VI EXT
Input for fixed DC voltage up to +60V
B. VO EXT
Pulsed output of DC voltage input to VI EXT
C. AUX INT
Up to ±10V DC for secondary DUT bias
D. VO INT
Up to ±10V pulse for DUT pulsed bias
E. TRIG
Internal mode output; 5V TTL pulse to sync an external DUT bias supply
[diagram/image in source — not reproduced here: SanjCONTROLLER PLUS diagram for TR imaging]
The remaining topics in this source chapter are presented only as diagrams/screenshots, with no accompanying procedural text: Relation to Timing Sequence for Transient Analysis; Internal Biasing; External DC Supply; Triggering an External Source; Slave Mode (TRIG IN) in Movie Mode only; Transient Timing Signal; Transient Software with Light Emission. [diagram/image in source — not reproduced here, for all of the above]