10. Device Biasing, Trigger Function, and Timing Reference
10. Device Biasing, Trigger Function, and Timing Reference
SanjCONTROLLER PLUS™ I/O (for TR imaging):
| Label | Description |
|---|---|
| A. VI EXT | Input for fixed DC voltage up to +60V |
| B. VO EXT | Pulsed output of DC voltage input to VI EXT |
| C. AUX INT | Up to ±10V DC for secondary DUT bias |
| D. VO INT | Up to ±10V pulse for DUT pulsed bias |
| E. TRIG | Internal mode output; 5V TTL pulse to sync an external DUT bias supply |
[diagram/image in source — not reproduced here: SanjCONTROLLER PLUS diagram for TR imaging]
The remaining topics in this source chapter are presented only as diagrams/screenshots, with no accompanying procedural text: Relation to Timing Sequence for Transient Analysis; Internal Biasing; External DC Supply; Triggering an External Source; Slave Mode (TRIG IN) in Movie Mode only; Transient Timing Signal; Transient Software with Light Emission. [diagram/image in source — not reproduced here, for all of the above]
No comments to display
No comments to display